Indicator Only – Functions with Existing Probes & Options
Note 1: Core charge will be automatically added to order. Core charge is refunded once valid core is returned to JPI (manufacturer). All cores must be sent direct to JPI.
Note 2: EDM 730/830 fits in a 3-1/8″ hole and is not a direct slide in for the EDM 700/800 2-1/4″ units.
This upgrade program will allow you to swap out your 700 to the new 730 or 800 to the new 830 as the new 730 and 830 use a standard 3-1/8″ mounting hole.
The 730/830 will use the same JPI probes and will better display engine parameters with this plug and play upgrade.
- LeanFind ™ Performs ROP and LOP, automatically finds the first and last cylinder to peak
- Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate
- Voltage, For alternator failure, monitored for over and under voltage with alarms
- Pilot Programmable Hi & Lo alarm limits. ALL programming from front panel
- All EDM’s TSO’d for quality with a 3 yr. Warranty on the Electronics
- Quick response probes, fastest accurate readings, pre-made harness and hardware
- Data Memory, reading once every 2 to 255 seconds
- EZPlot-1 program for plotting and downloading data
- USB download port built in with memory stick (730/830/790/900 Only)
- Full color TFT screen 4 inches Diagonal (730/830/790/900 Only)